![]() To accomplish this I decided to use StructoLite, a modern mix type base coat plaster. Finish coat to give a smooth and ready for paint surfaceīased on this we wouldn't have enough Master of Plaster to do the whole room with two base coats, so we had to make a little change with the first coat.Base coat to completely cover mesh and give us flat surface.Base coat with fiberglass mesh embedded. ![]() For this process we'll ultimately do a three coat plaster approach. Before we could apply the first coat of Master of Plaster, I wanted to smooth many of the major problem areas and make everything a little smoother. It has always been covered with wallpaper, so once we removed what remained of the wallpaper, we were left with a very irregular surface. One of the major issues with our existing wall is the fact that it never had a finish coat of plaster applied. But as we're finally nearing the conclusion, I'm extremely excited to share some major advances in taking our walls from damaged and dingy. I spent the lull between activity doing what I do best, obsessing about the work we were doing and how to make the end result the best it could be while essentially paralyzing myself from making headway. In true Alex form, this project has stretched on and on, taking far longer than any reasonable project timeline should. Plaster Restoration Part 3: Master of Plaster Finish Coat with No Sanding!.Plaster Restoration Next Steps Part 2: Master of Plaster's Beautiful Lime Base Coat.Plaster Restoration Next Steps Part 1: Base Coat with Structo-Lite.Be sure to check out the rest in the series for our progress and more of our thoughts on the product. Today we have part one (of a two part) update on our progress.īefore we get started, this is one of a series of blog posts about Master of Plaster's Lime Restoration Plaster. Wide cracks: A crack of 1/4 inch to 1/2 inch in width is problematic it's a sign of something going on that is more serious than a house settling or climate control issues.Back in January we shared the first steps we were taking to properly restore our original plaster walls.They are most common in the first 10 years of plaster installation. Diagonal, horizontal, or vertical cracks: These streak-like cracks are structural cracks caused by foundation movement, moisture expansion, or plaster drying and shrinking.This is a sign of a bigger problem that should be remedied immediately. ![]() It could be from outside water getting in or a pipe in the walls that has sprung a leak.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |